How to operate this machine?
Initial state →Put the material into the mould, repos it the ejector cylinder →Load the mould →Close the mould quickly→ Clamp the mould slowly, increase pressure →Exhaust→ Vulcanization start →Vulcanization finish→ Open mould quickly→ Pushing out the mould →Ejector cylinder works, and separate mould and product→ Take out the product
The attentions for using flat vulcanizing machine:
Operating procedures
1. before the experiment, check whether the required scale is reached in the fuel tank. Then check whether the components are working properly and whether the column is lubricated.
2. When the preheating is done, pay attention to the temperature of the hot plate. If it does not meet the requirements, it must be adjusted under the guidance of the engineer. It is strictly prohibited to tamper with it.
3. When placing the mold between the hot plates, it shall prevent burns or crush accidents. Do not place the mold when the hot plate rises.
4. In the middle of the tablet should be placed after the mold is loaded, people should stand in the center of the console. When the required pressure is reached after the mold is closed, the motor is turned off, and if it fails to meet the requirements, it must be adjusted by the engineer.
5. Take the mold to use iron hooks to prevent pressure on the hand. If the mold is opened, the product will stick to the mold. Tap the mold to carefully knock the mold to prevent the mold from falling or bruising.
6. If the machine fails, you must cut off the power immediately.
Company Information
Guangzhou JuChuan Machinery Co.,Ltd, our factoryhas 22 years experience for the silicone rubber injection molding machines.
We sold machines to Thailand, Malaysia, Vietnam, Israel, Russia, Germany, Afghanistan, and Sudan before.
Our main products:
1.Silicone rubber injection molding machine,
2.Vertical hydraulic rubber injection machine,
3.Horizontal silicone rubber injection machine,
4.Liquid silicone injection molding machine,
5.Vacuum compression machine
6.Silicone rubber hot press machine.
Trade show
Our Services
Our service:
1. Free technology training: you can come for inspection and training for free.
2. Free Installation and debugging: Our engineers will teach you about the installation and debugging for free.
3. After-sales service: We will supply the free repairmen on this machine for one year, but will supply the maintenance lifetime. (The service is only for natural damage)
4. Online remote control for software problems, whatspp or wechat for video checking.
