Hydraulic Vulcanizing Machine Silicone Swim Cap Making Machine 380v

How to operate this machine?

1. Place the material into the mould and reposition it with the ejector cylinder.
2. Load the mould and close it swiftly.
3. Clamp the mould slowly while increasing pressure.
4. Exhaust the system.
5. Start the vulcanization process.
6. Wait for vulcanization to finish.
7. Open the mould quickly.
8. Push out the mould.
9. Activate the ejector cylinder to separate the mould from the product.
10. Finally, take out the product.

The attentions for using flat vulcanizing machine:

1. The guidelines for using a flat vulcanizing machine are as follows:
2. Ensure that the operation pressure does not exceed the rated pressure.
3. The minimum size of the mold should be equal to or greater than the plunger diameter, and the mold should be positioned centrally on the hot plate. Adjust the working fluid pressure based on the mold size and curing time.
4. When not in use, disconnect the total power supply.
5. Regularly tighten the column nut to maintain proper functionality.
6. During empty tests, place 60mm thick backing plates on the flat surface.
7. Ensure reliable grounding for both the mainframe and control box.
8. Periodically check and tighten each contact point to prevent any loosening.
9. Keep electrical components clean, and avoid impacting or knocking the instruments.

Technical parameter:

Machine detials

Related product:

Shipping and packing

Company information

Guangzhou JuChuan Machinery Co.,Ltd was established in 1997. We are mainly specializing in producing silicone/rubber injection molding machines, Vacuum compression molding machines, plate vulcanizing machine, “all-in-out” ,liquid silicone injection machine, ”first in first out” ,”first in last out”, vertical and horizontal silicone/rubber injection machine for 20 years.

We have a special company patent: Anti-collision Molding System prevent mold damage occurring form misalignment.

Trade show

Thailand Exhibition Show:

Our service:

1. Free technology training: you can come for inspection and training for free.

2. Free Installation and debugging: Our engineers will teach you about the installation and debugging for free.

3. After-sales service: We will supply the free repairmen on this machine for one year, but will supply the maintenance lifetime. (The service is only for natural damage)

4. Online remote control for software problems, whatspp or wechat for video checking.